manualshive.com logo in svg

DATASONICS SIS-1500, Системное руководство

Поделиться
Скачать
DATASONICS SIS-1500 Скачать руководство пользователя страница 64

3-28

DATASONICS

Volume I System Manual

June 1998

2.

Select the Diag Mode check box. The label “Diag Mode” turns red, 
signifying that the command to go into diagnostic mode is ready to be 
sent to the tow vehicle.

3.

Click the down arrow in the Diag Mode drop-down list box. A list of 
available diagnostics open.

4.

Select Chirp Pattern (Sonar) from the Diag Mode drop-down list box. 

5.

Click Accept. The label “Diag Mode” turns black, signifying that the 
command to go into diagnostic mode and start the chirp pattern 
diagnostics has been sent to the tow vehicle, and the diagnostics start.

6.

Examine the Port and Starboard Sidescan Sonar displays in the Main 
window. They should look similar to those shown in Figure 3-18 with 
black and gray bars running vertically in the display.

Figure 3-18  Chirp Pattern Test Display

7.

Clear the Diag Mode check box. The label “Diag Mode” turns red, 
signifying that the command to go out of diagnostics mode and stop the 
chirp pattern diagnostics is ready to be sent to the tow vehicle.

8.

Click Accept. The label “Diag Mode” turns black, signifying that the 
command to stop the chirp pattern diagnostics has been sent to the tow 
vehicle, and the diagnostics stop.

9.

Click Cancel to close the Sonar Diagnostics box.

Содержание SIS-1500















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды