manualshive.com logo in svg

DATASONICS SIS-1500, Системное руководство

Поделиться
Скачать
DATASONICS SIS-1500 Скачать руководство пользователя страница 4

iv

DATASONICS

Volume I System Manual

June 1998

Liability 

Datasonics assumes no liability for damages, losses or costs incurred 
consequentially through operation or malfunction of Datasonics products. 

Title 

Title shall pass to the Buyer on delivery to the carrier at Cataumet, 
Massachusetts, U.S.A. Risk of damage or loss following such delivery shall 
be the Buyer's, and Datasonics shall in no way be responsible for safe arrival 
of the shipment. Title shall so pass to the Buyer regardless of any provision 
for payment of freight or insurance by Datasonics, and regardless of the form 
of the shipping documents. If shipment is consigned to Datasonics, it shall be 
for the purpose of securing the Buyer's obligations under contract. 

Changes 

Datasonics reserves the right to make changes in design or specifications at 
any time without incurring any obligation to modify previously installed units. 
This manual is provided for informational and reference purpose only and is 
subject to change without notice.

Содержание SIS-1500















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды