Safety Instructions
Important Safety Instructions
Your D-100 has been carefully designed to give you years of safe, reliable performance. As with
all electrical equipment, however, there are a few basic precautions you should take to avoid hurting
yourself or damaging the unit:
• Read the installation and operating instructions in this manual carefully. Be sure to save it for
future reference.
• Read and follow all warning and instruction labels on the product itself.
• To protect the D-100 from overheating, make sure all openings on the unit are not blocked.
Do not place on or near a heat source, such as a radiator or heat register.
• Do not use your D-100 near water, or spill liquid of any kind into it.
• Be certain that your power source matches the rating in the specifications of this manual. If
you’re not sure of the type of power supply to your facility, consult your dealer or local
power company.
• Do not allow anything to rest on the power cord. Do not locate this product where the cord
will be abused by persons walking on it.
• Do not overload wall outlets and extension cords, as this can result in the risk of fire or
electric shock.
• Never push objects of any kind into this product through ventilation holes as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
• To reduce the risk of electric shock, do not disassemble this product, but return it to
Datas’ Customer Service, or another approved repair facility, when any service or repair
work is required. Opening or removing covers may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.
• If anything happens that indicates that your D-100 is not working properly or has been
damaged, unplug it immediately and follow the procedures in the manual for having it
serviced. Return the unit for servicing under the following conditions:
1. The power cord or plug is frayed or damaged.
2. Liquid has been spilled into the product or it has been exposed to water.
3. The unit has been dropped, or the enclosure is damaged.
4. The unit doesn’t function normally when you’re following the operating instructions.
• Avoid using a telephone (other than a cordless type) during an electrical storm. There may be
a remote risk of electric shock from lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
• To reduce the risk of fire or injury to persons, read and follow these instructions:
1. Use only the specified type and size batteries.
2. Do not dispose of the batteries in a fire. The cell may explode. Check with local
codes for possible special disposal instructions.
3. Do not open or mutilate batteries. Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
4. Exercise care in handling batteries in order not to short the battery with conducting
materials such as rings, bracelets, and keys. The battery or conductor may overheat and
cause burns.
iii
Содержание D-100 Series
