Datas Technology D-100 Series, Руководство по установке

Страница: 20 / 42

Enabling this feature will temporarily load the default Master Administrator account (username:
admin, password: ims4k). This temporary account will unload if any one of the following occurs:
(1) Any of the Master Administrator accounts is edited, (2) A new Master Administrator account is
created, or (3) The system reboots.
Option 0 allows you to disable all inbound modem communications. This feature is provided for
users who cannot have a device with a modem connected to their network.
Option A allows you to change the Local Configuration password.
Option B allows you to reset all settings to their default values.
Option C will display statistics.
Option D will save all changes and reboot the system. A reboot is required for changes to take
effect.
Option E will save all changes and logout, but the changes will not be activated until the system
reboots.
Local Configuration Definitions
Password: This is the password which protects access to the local configuration parameters.
The default password in a new unit is “ims4k.”
IP: This is the IP address assigned to the D-100 on your network. This address is provided
by you or your network administrator. It is formatted as a standard dotted decimal number.
Mask: This is the subnet mask which distinguishes the portion of the IP address that is the
network ID from the portion that is the station ID.
Gateway: A TCP/IP network must have a gateway to communicate beyond the LAN identified
by the network ID. A gateway is a computer or router that is connected to two different
networks and can move TCP/IP data from one to the other. If your TCP/IP network has more
than one LAN or if you are connecting to the Internet, you will need to know the IP address
of the gateway that will transfer TCP/IP data in and out of your LAN. A single LAN that is
not connected to other LANs does not require a gateway setting.
DNS: The DNS server is used to translate site names into actual numeric network addresses.
Enter the IP address of the DNS server for your network.
Enable Web: Setting this to “Y” will enable the web page feature of the D-100. Set this to
"N" if you do not want the unit to produce a web page.
Enable Web Password: Setting this to “Y” will require a valid user-name and password to be
entered in order to view the web page.
Enable RAS: Setting this to “Y” will enable Remote Network Access during a dial-up
connection.
RAS IP: This is the IP address assigned to the remote computer calling in to the host.
Enable 2-Way E-mail: Setting this to “Y” will enable the 2-way email feature. With this
feature enabled you can send commands to the D-100 via e-mail and receive responses
back. Set this to "N" to disable this feature.
Enterprise Name: The Enterprise name will appear at the top level of the D-100
ConsoleView software whenever a user logs in to an D-100 Host. It provides identification
consistency among multiple users and allows for future Enterprise features.
Installation Manual
20