Dataq DI-710 Series, Руководство пользователя

Страница: 59 / 84

DI–710 Series and DI-715B Series Hardware Manual
Accessories
49
DI-75B Backpack (for use with DI-715B models)
The DI-75B is an eight-channel, 5B-module expansion device for DI-715B, DI-720, and DI-730 instruments. Each
DI-75B accepts up to eight high performance, plug-in signal conditioning modules expanding the measurement capa-
bility of its host instrument. Each DI-75B is provided with the appropriate cable to connect it to its host instrument.
Power is obtained from the host instrument through the supplied, dual-ended power cable.
Each DI-75B channel consumes one channel from its host instrument in return for the isolated, signal-conditioned
input it provides. A maximum of one DI-75B instrument may be connected to any DI-715B instrument to get a total
of 16, 5B-conditioned input channels. Signal connections are made to the DI-75B through a removable screw termi-
nal block located on the back panel of the instrument.
Connecting the DI-75B to the Host Instrument
NOTE: The dual-ended power cable is sized to fit when the DI-75B is stacked on top of the host instrument. If these
instruments are not in a stacked configuration, do so before proceeding.
1. Connect the appropriate end of the included expansion signal cable to EXPANSION on the rear panel of the host
instrument.
2. Connect the other end of the expansion cable to EXPANSION IN on the rear panel of the DI-75B.
Applying Power to the DI-75B
A separate power supply is not required. Power is obtained from the host instrument through the dual-ended power
cable supplied with the DI-75B. Apply power using the following procedure:
1. Unplug the five-pin DIN end of the power adapter cable that is currently supplying power to your host instru-
ment and plug it into one of the DI-75B's power input jacks.
2. Now plug one end of the dual-ended power cable into the remaining power jack on the DI-75B and plug the other
end into the host instrument power input jack.