Dataq DI-710 Series, Руководство пользователя

Страница: 54 / 84

DI–710 Series and DI-715B Series Hardware Manual
Accessories
44
The DI-205 (for use with DI-710 “D” models)
The DI-205 is a termination panel for general purpose input and output. The DI-205 along with the supplied cable
provides a convenient way to interface the Digital I/O, analog output, and analog input signals to DI-710 Series “D”
models (see “37-pin D sub connector” on page 23). Signal connection is via terminal strip for digital and analog out-
put signals, or 5-way binding posts (banana jacks) for analog input signals.
Input/Output Panel Interconnections
Digital I/O - Analog Output
The 20 position screw terminal block (labelled Digital I/O - Analog Output) provides access to the Digital I/O ports
of the 37-pin D sub connector.
Note: Digital I/O connections cannot be used concurrently. DI0 and DO0 are directly
connected inside the DI-710 (as are DI1 and DO1, DI2 and DO2, etc.) The Digital I/O is not available in stand-alone
mode.
See “37-pin D sub connector” on page 23 for pinout.
DAC1 and DAC2 are Reserved ports and should not be used.
VOUT connects to the +5VPWR pin. See “37-pin D sub connector” on page 23 for pinout.
-ODEL$)
CHAN. 1 CHAN. 2 CHAN. 3 CHAN. 4 CHAN. 5 CHAN. 6 CHAN. 7 CHAN. 8
S. GND S. GND S. GND S. GND S. GND S. GND S. GND S. GND
S. GND S. GND S. GND S. GND S. GND S. GND S. GND S. GND
CHAN.9(1) CHAN.10(2) CHAN.11(3) CHAN.12(4) CHAN.13(5) CHAN.14(6) CHAN.15(7) CHAN.16(8)
DGND
DI0 DI1 DI2 DI3 DI4 DI5 DI6 DI7
DO0 DO1 DO2 DO3 DO4 DO5 DO6 DO7
DAC1 DAC2
VOUT
Digital I/O - Analog Output
Dif.
-
+