Dataq DI-500 Series, Руководство пользователя

Страница: 30 / 50

DI-500/510 Series and DI-750/760 Series Hardware Manual
Enabling Channels for Acquisition
24
DI-510-64 as a master and the DI-510-64-X as a slave. You would enable the first 32 channels of the DI-510-64-X on
row “C,” and the second group of 32 channels on row “D.”
Using an ordinary pencil, label the DI-510-64 expander channels by writing the letters from the grid in the boxes on
the instrument panel overlay (i.e., place a “C” in one box to designate channels C1 through C32, and a “D” in the
other box to designate channels D1 through D32).
Point to the box in the grid that represents the desired channel and click the left mouse button to enable the
channel as a differential input (when not using 5B modules) or as an input defined by the 5B module (when
used). A check mark is displayed in the desired channel box, indicating that a differential input (when not
using 5B modules) or an input defined by the 5B module (when used) has been enabled. A second activation removes
the check mark and thus disables the channel.
On this instrument, the plus sign (+) and the check mark both mean the channel is enabled as a differential input
(when not using 5B modules) or as an input defined by the 5B module (when used). Clicking or double-clicking with
the left mouse button accomplishes the same result (differential channel pairs are not supported on this instrument).
Digital inputs are not supported on this instrument.
Free Datasheet http://www.datasheet4u.com/