Dataq DI-500 Series, Руководство пользователя

Страница: 25 / 50

DI-500/510 Series and DI-750/760 Series Hardware Manual
Enabling Channels for Acquisition
19
DI-510-32 and DI-760-32 Instruments
Ignore the top row. Channels 1 through 32 are enabled on the second row from the top (row “MUX A”).
When other instruments are connected as a slave to the DI-510-32, their channels are enabled starting with row “B”
(and “C,” etc. when more than 32 channels are multiplexed). Using an ordinary pencil, label the DI-510-32 channels
by writing the letter from the grid in the box on the instrument panel overlay (i.e., place an “A” in the box to designate
channels A1 through A32. Do the same for any slave instruments in your configuration, but use B, C, D, etc.).
Point to the box in the grid that represents the desired channel and click the left mouse button to enable the
channel as a differential input (when not using 5B modules) or as an input defined by the 5B module (when
used). A check mark is displayed in the desired channel box, indicating that a differential input (when not
using 5B modules) or an input defined by the 5B module (when used) has been enabled. A second activation removes
the check mark and thus disables the channel.
On this instrument, the plus sign (+) and the check mark both mean the channel is enabled as a differential input
(when not using 5B modules) or as an input defined by the 5B module (when used).Clicking or double-clicking with
the left mouse button accomplishes the same result (differential channel pairs are not supported on this instrument).
Digital inputs are not supported on this instrument.
Free Datasheet http://www.datasheet4u.com/