Dataq DI-500 Series, Руководство пользователя

Страница: 20 / 50

DI-500/510 Series and DI-750/760 Series Hardware Manual
Getting Started
14
Installing the Software
After you have completed the hardware installation, connected your signals, and labeled the input channel(s), you are
ready to install and run the software.
There are two software approaches for DI-500/510 and DI-750/760 Series instruments: writing/developing your own
acquisition, review, and analysis programs or using W
IN
D
AQ
software.
For the programmers who will be writing their own acquisition, review, and analysis programs, DATAQ Instruments,
Inc. provides an ActiveX Control Library free with every DATAQ Instrument purchased. The ActiveX Control
Library is installed automatically when you install any version of W
IN
D
AQ
software and comes with its own built-in
documentation.
For non-programmers, or for those who want convenience, DATAQ Instruments, Inc. provides W
IN
D
AQ
software.
W
IN
D
AQ
is easy to use, ready-to-run, data acquisition, review, and analysis software for the Windows™ environ-
ment.
W
IN
D
AQ
/Lite recording and playback software is included free with every DATAQ Instrument purchase. W
IN
D
AQ
/
Lite recording software is limited to 16 channels and 240 Hz maximum throughput when you enter the record mode.
If you do not want to program and your application does not require more than 16 channels or a recording throughput
more than 240 Hz, then you will want to install W
IN
D
AQ
/Lite software. Find the W
IN
D
AQ
/Lite software package
(manuals and CD-ROM), and proceed with the installation instructions contained therein.
Free Datasheet http://www.datasheet4u.com/