iBootBar
Page 6
ibootbar_v1.2x
Dial Line
Models with suffix –M have an internal modem. This modem supports both data and DTMF control. The modem is
approved for use in 36 countries
Expansion
For future applications.
Power Source
The
iBB-N15 <and iBB-N15-M>
provides a linecord for connection to a 15 Amp 115VAC service. The total maximum
current load for all outlets on the iBB-N15 cannot exceed 12 Amps.
The
iBB-2N15<-M>
provides two linecords for connection to 15 Amp 115VAC services. The total maximum current load
for outlets on any linecord cannot exceed 12 Amps. Each linecord distributes power to four outlets.
The
iBB-N20<-M>
provides a linecord for connection to a 20 Amp 115VAC service. The total maximum current load for all
outlets on the iBB-N20 cannot exceed 16 Amps.
The
iBB-2N20<-M>
provides two linecords for connection to 20 Amp 115VAC services. The total maximum current load
for outlets on any linecord cannot exceed 16 Amps. Each linecord distributes power to four outlets.
The
iBB-C10<-M>
is for international applications and can be used on 100V to 240VAC. The iBB-C10 provides an IEC
320 style universal inlet for connecting a detachable power cord. A standard IEC to CEE7 European cord set is supplied
with the unit for use on 10 Amp 240VAC service*. The total maximum current load for all outlets cannot exceed 12 Amps
at 115VAC or 10 Amps when used at 240VAC.
The
iBB-2C10<-M>
is for international applications and can be used on 100V to 240VAC. The iBB-2C10 provides two
IEC 320 style universal inlets for connecting a detachable power cord. Two standard IEC to CEE7 European cord sets are
supplied with the unit for use on 10 Amp 240VAC service*. The total maximum current load for outlets on any linecord
cannot exceed 12 Amps at 115VAC or 10 Amps when used at 240VAC. Each linecord distributes power to four outlets.
The
iBB-C20<-M>
is for international applications and can be used on 100V to 240VAC. The iBB-C20 provides an IEC
320 style universal inlet for connecting a detachable power cord. A standard IEC to CEE7 European cord set is supplied
with the unit for use on 20 Amp 240VAC service*. The total maximum current load for all outlets cannot exceed 16 Amps.
The
iBB-2C20<-M>
is for international applications and can be used on 100V to 240VAC. The iBB-2C20 provides two
IEC 320 style universal inlets for connecting a detachable power cord. Two standard IEC to CEE7 European cord sets are
supplied with the unit for use on 16 Amp 240VAC service*. The total maximum current load for outlets on any linecord
cannot exceed 16 Amps. Each linecord distributes power to four outlets.
* Power cords for other countries are available from your local source. If a power cord with a different terminating plug is
required, be sure it is properly rated and meets all the required local electrical standards.
