iboot-poe-p_v190422w
iBoot-PoE-P
Page 11
4.3.
Control and Status Page
Once the user is validated, the Control and Status page is
displayed. (Only one person can be connected to the
iBoot-PoE-P at a time.).
This page provides automatic updates every 5 seconds.
To control the power, click on the appropriate button.
During power cycling, the Power Status bar will indicate the
temporary status, with a blue background. Once the cycle
is complete, the status bar will revert to its original
condition. To abort a power cycle, click on either Power
On or Power Off buttons.
If the AutoPing and/or Traffic Monitor features are in use,
the page will also display the current status, OK or Failed,
for each, with a counter of how many times action was triggered. If connecting with the Admin credentials,
reset buttons for the Trigger counter is provided.
If the iBoot-PoE-P is connected to a time server (see Section 5.4), The Home page will also show the five
most recent history events, including the Outlet, Action, User and Time/Date of each event. The iBoot-
PoE-P holds the last 32 events in memory. The user can access a complete history webpage, download
the history in a .csv file, or clear the history.
Navigation Links
Refresh
Use the Refresh link to obtain the latest status of iBoot-PoE-P. Using your browser's refresh button can
lead to inadvertent power switching. If an NTP server is being used, the time of the last refresh will be
shown in the upper right corner.
Setup
To access the Setup page, the administrator credentials are required. When logged in as User, the
challenge for Administrator credentials will be displayed.
Logout
When you are finished with iBoot-PoE-P, click on
Logout. A Goodbye page will be displayed. This page
has a URL link to re-connect with the iBoot. The
linkback URL is user settable. If no linkback is set, the
hyperlink will be the unit’s IP Address.
