If you chose to have the DDCT configure your wiring this page will
display the recommended connections, as shown above. Connect
each display to the corresponding output connector on the rear of the
VSNMicro 600. If your VSNMicro 600 is connected to a printer, you can
print a copy of the wiring diagram using
Print a Wiring Diagram
.
Note: The Datapath Diagnostic Suite must be installed to print a wiring
diagram. The suite can be downloaded from the Datapath website
downloads page.
The DDCT can recommend the best wiring configuration for your
system, ensuring the load is balanced between the graphics hardware.
Click on
Recommended
for the optimal configuration for your system.
Should you wish to manually wire your system and decide for yourself
which output is connected to which display, click on
Custom
. You will
be next be presented with the
Summary
page:
12
VSNMicro 600 Quick Start Guide
