When selecting the EDID of the remote monitor
users must ensure the monitor is not [Field]4K
capable as the Arqa unit is only designed to carry
HD and not 4K.
Note: If left at the default setting of ‘remote
monitor’ and plugged into a 4K capable
display, Arqa will not work!
Choose which DDC or EDID information your PC
uses.
Press
0
to use the DDC information from the monitor attached to the remote unit.
Press
2
to save the current DDC information.
The unit uses the same settings after the unit has been restarted.
Press
4
through 8 to use a predefined resolution which is saved.
Press
ESC
to go back to the main menu.
Available Devices
The devices you can connect to and share are listed
on the
Device List
menu. To access the menu, open
the ‘OSD main menu’ by quickly pressing the
Scroll
key
a minimum of 5 times, then press the
L
key.
Use the up/down cursor keys to:
Select a device, press
ENTER
.
Remove a device from your favourite list press
DELETE
.
To enter device filter press
TAB
then press
ENTER
to apply the filter.
Press
ESC
to exit the Share Device List page.
18
Arqa User Guide