Datamax RL3, Руководство пользователя

Страница: 22 / 70

14
3.1.3 Buttons
Ready Mode
Button Function
Short Press: Wakes the printer from sleep or off mode.
Short Press: Puts the printer into sleep mode.
Press and hold (~4s) then release: Turns off the printer (RL3 models only).
Press and hold (~10s): Resets the printer.
Short Press: Feeds one label or a preset paper length
Press and hold for 4 and 7 seconds and then release: Prints the Configuration Label
Press and hold until printing starts (approximately 8 seconds): Prints the Configuration Label
with additional information.
Enters the printer’s menu system
Long Press (~4s): Toggles the Wireless LAN/Bluetooth radio on and off
Menu Mode
Button Menu Icon Function

Returns to the previous menu level, at the top level it will exit the menu system.
 Scrolls downward to the next available menu item or menu branch.
Exits the menu system and returns to ‘Ready Mode’.
OK Selects the current highlighted item or menu branch.
3.1.4 Menu
Pressing the button enters the printer’s menu system. The menu system is informational only,
configuration changes to the printer can not be made via the menu. The menu consists of three branches,
default values are show next to each item.
Serial
Baud Rate 9600 BPS
Data Bits 8
Parity None
Stop Bits 1
Protocol Hardware
MAC Address
xx:xx:xx:xx:xx:xx (varies for each printer; standard 6-octets of hexadecimal digits)
Calibrate Media The printer is factory calibrated and should not need further calibration. However
certain types of aftermarket paper/media will need to be calibrated. Depending on the
media type being used, this function senses the gaps between labels or the black
mark on the back of the media. Once the printer sense these locations, it can
accurately position the media for printing at the start of each label.
Once selected the printer will feed media, pause ~20 seconds and then complete the
calibration.