Datamax MP-Compact4 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 95

background image

PROGRAMMER’S REFERENCE MANUAL

Appendix A: Intelhex Records.

Page 62

Paper sensing

The printer is equipped with a photo sensor in the paper track, which is used both to

synchronise with holes in the paper or the gap between labels, and to sense the end of the
paper.

If no gap appears at the photo sensor before printing is complete the printer stops when the

paper has been fed the dispensing feed length after the end of the print. If a minimum paper
feed length has been set the printer will not stop before it has fed out at least the specified
amount of paper.

If a gap is detected the printer feeds the next label to the print area, and then it feeds the

selected dispensing feed length to position the next label for printing.

When the printer runs out of paper it will suspend printing. Press the print button when new

paper stock has been installed. The printer will then print a copy of the printout that was
interrupted, unless this option has been disabled. (See parameter 134 for more information).

To synchronise with the label gap after loading new paper press the print button and keep it

depressed until the paper movement ceases.

Nova models use a media position sensor (MPS), which contains two different types of

sensors. The first type has the same function as a regular photo sensor. In the MPS, two
sensors of this type exists, but at different positions. The second type detects black marks on
the surface opposite to the printing surface. Thus, it is possible to set the MPS in three
different modes depending on label gap position and type. Parameter 167 is used to change
MPS mode.

Cutter

The printer may be equipped with a cutter. If a cutter is attached, the printer automatically

detects it by trying to cut at startup. When printing with a cutter attached, the printer cuts the
label/paper after each printout. There are some situations, however, when cutting is not
wanted after each printout. Automatic cutting can then be disabled and a manual cut
command is used to cut the paper. For more information, see section ‘Document Commands’.

Label taken sensor

The printer may be equipped with a Label taken sensor (LTS). The printer automatically

detects the LTS. No further setup is necessary.

When printing a batch, the printer stops and waits until current label has been removed until

next label will be printed. When printing a single label, no copy of that label will be printed
when removing the current label, unless parameter 93 has been set. (See parameter 93 for
more information).

LED indication

«
...
64
65
66
67
68
...
»

Содержание MP-Compact4
































































































Отзывы:

Нет отзывов

Похожие инструкции для MP-Compact4

Бренд: Oki Страницы: 137

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 858

Бренд: Datecs Страницы: 73

Бренд: Datamax Страницы: 12

E-Class Mark II

Бренд: Datamax Страницы: 40

Бренд: Datamax Страницы: 46

Бренд: Canon Страницы: 30

Pixma TS7700i Series

Бренд: Canon Страницы: 554

Бренд: Konica Minolta Страницы: 32

Бренд: Afinia 3D Страницы: 47

PS100 - Photo Printer - 50 Sheets

Бренд: Olympus Страницы: 2

Бренд: Sindoh Страницы: 142

Бренд: Riso Страницы: 208

Бренд: U-Line Страницы: 33

Бренд: Oki Страницы: 107

Genmitsu 3018-MX3

Бренд: SainSmart Страницы: 50

Бренд: XYZ Printing Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды