W i r e l e s s N e t w o r k S e t u p
5
Wireless Network Setup
It is recommended that the printer’s communication settings be reset to factory defaults to avoid any conflicts in
configuration.
To reset the printer’s communication settings:
;
Note:
Non-display printer users should skip this reset procedure.
1. Turn on the printer and press the
MENU BUTTON
.
2. Using
the
DOWN BUTTON
scroll to ‘COMMMUNICATIONS’ and press the
ENTER KEY
.
3. Using
the
DOWN BUTTON
scroll to ‘NIC ADAPTER’ and press the
ENTER KEY
.
4. Using
the
DOWN BUTTON
scroll to ‘SET FACTORY DEFAULTS’ and press the
ENTER KEY
. When prompted
press the
YES KEY
. The printer with then reset and return to Ready Mode.
At this point it is recommended to print a Wireless Report. This Wireless Report is generated by the printer and lists
important default information such as the IP Address and SSID.
To print the ‘Wireless Report’:
1. Press the
PAUSE, FEED, CANCEL
buttons at the same time.
The Wireless Card can be configured via a wireless Adhoc connection or using the Datamax Printer Configuration Utility
(DMXConfig) via a serial or parallel connection. The procedures for each are listed in the following sections.
