Dataman 448PRO2AP-AU, Руководство пользователя, Страница: 95 / 160

PG4UW
95
Statistics dialog contains seven statistics values – Success, Operational failure, Adapter
test failure, Insertion test failure, ID check failure, Other failure (prog. SW, HW) and
Total.
Meaning of the values is:
Success
number of operations which where successfully completed
Operational failure number of operations which where not successfully
completed due to error of device
Adapter test failure number of operations which where not successfully
completed due to incorrect programming adapter
Insertion test failure number of operations which where not successfully
completed due to incorrect position of device in
programming adapter
ID check failure number of operations which where not successfully
completed due to incorrect ID code read from device
Other failure (prog. SW, HW) number of operations which where not successfully
completed due to hardware error of programmer or control
software error
Total number of all operations
Actual statistics values are displaying in main window of control program in Statistics panel.
Statistics panel contains four statistics values – Success, Operational failure, Other failure,
Total and two Count down information values Count down and Remains.
Meaning of the values is:
Success
number of operations which where successfully completed
Operational failure number of operations which where not successfully completed due to
error of device
Other failure number of operations which where not successfully completed due to
other reason than device error
Total number of all operations
Count down informs about Count down activity (Enabled or Disabled)
Remains informs about remaining number of device operations to do
Note: When new device type is selected, all statistics values are set to zero and Count down
is set to Disabled.
Reset button in Statistics panel reset statistics values.
Reload Count down button in Statistics panel reloads initial value to Count down.
For PG4UW software, the statistics information is saved to Log window when closing PG4UW.
For multiprogramming PG4UWMC software, the statistics information is saved to Job
Summary report.
Device / Device options / Associated file
This command is used for setting associated file with current device. This is a file, which can
be automatic loaded to buffer after device is selected from default devices select list or by start
control program.