XRF410N™ INSTALLATION
10
EMK-600 Side Mount - Standard
XRF410N and EMK-600 Mirror alignment is maintained when the EMK is mounted directly to
the frame profiles. The skew angle is made at the mirror instead of at the reader.
1. Mount the mirror brackets to the profiles
with one bolt in the center position and
one bolt in the outer ring.
2. Rotate the mirror brackets so that the
15° skew angle slot is aligned with the
profile channel, (see the figure below).
3. Mount the XRF410N assembly bracket
to the profile using the through-holes
(not the slots).
4. Move the mirror assembly to the correct
distance from the reader according to
your application.
5. Move the Matrix XRF410N assembly
vertically to center it on the mirror.
6. Tighten the bolts.
15° Skew
