Datalogic SD9030, Краткое руководство пользователя, Страница: 9 / 24

SD9030 Dongle Configuration
Quick Reference Guide 5
SD9030 Dongle Configuration
The SD9030 configuration can be performed in three ways: by
using the Datalogic Aladdin
™
software configuration program,
by sending configuration strings from the Host PC via USB-
COM interface or by reading configuration bar codes with the
PowerScan
™
PM9X00 reader.
Datalogic Aladdin™
Datalogic Aladdin
™
is a multi-platform utility program that
provides a quick and user-friendly configuration method via
the USB-COM interface. It also allows upgrading the software
of the connected device (see the Datalogic Aladdin
™
Help On-
Line for more details).
Serial Configuration
By connecting the SD9030 Dongle to a PC through a USB-
COM interface, it is possible to send configuration strings
from the PC to the dongle.
Configuration Bar Codes
Link the SD9030 Dongle and the reader by scanning the link-
ing label attached to the dongle. Once the pairing is complete,
you can configure the SD9030 Dongle by reading configura-
tion bar codes in this manual.
To configure the SD9030 Dongle using the PowerScan
™
PM9X00 reader (paired to the dongle), follow the procedure
according to the interface selected.
Resetting Standard Product Defaults
Reference the PRG for a listing of standard factory settings. If
you aren’t sure what programming options are in your reader,
or you’ve changed some options and want the factory set-
tings restored, scan the
Standard Product Default Settings
bar code below to copy the factory configuration for the cur-
rently active interface to the current configuration.
Standard Product Default Settings
Factory defaults are based on the interface type. Con-
figure the reader for the correct interface before scan-
ning this label.