Datalogic SD9030, Краткое руководство пользователя, Страница: 5 / 24

Quick Reference Guide 1
Using the SD9030 Dongle
The SD9030 Dongle, when paired with one or more Power-
Scan™ PM9X00 readers, builds a Cordless Reading System
for the collection, decoding and transmission of bar code
data. It can be connected to a Host PC via USB and is
suited for single-cradle layouts.
When the button is pressed, the SD9030 Dongle will
transmit a "broadcast" message. When the broadcast is
sent, and the Radio RX Timeout is set to keep the radio
awake, all properly configured scanners that are linked to
that base and within radio range coverage will emit a beep
and blink for 5 seconds. This functionality is useful to:
• verify which scanner is linked to a certain base station
• detect a scanner forgotten somewhere
The backlight of the button shows the status of the
SD9030 Dongle as described by the table below.
EVENT LED
Power ON Yellow steady on
Label Programming /
Service Mode
Yellow rapidly blinking
Data or label transmit-
ted to the host
Yellow blinks one time
Broadcast Green rapidly blinking
Disabled by host
Yellow Blinking once per sec-
ond
Firmware upgrade Green Blinking