Datalogic SD9030, Краткое руководство пользователя, Страница: 10 / 24

Selecting the Interface Type
6 SD9030 Dongle
To change the defaults refer to the PowerScan
™
9X00 PRG,
or to the Datalogic Aladdin
™
Configuration program, both
downloadable from the Datalogic website.
Selecting the Interface Type
Upon completing the physical connection between the
reader and its host, scan the appropriate bar code for your
system’s correct interface type.
Configuring the Interface
Scan the programming bar code which selects the appro-
priate interface type for the system the reader will be con-
nected to.
CAUTION
Scanning this bar code will RESET all settings for the
PowerScan
™
PM9X00. Any customized settings that
may have been applied to the reader will be lost.
Unlike some other programming features and options,
interface selections require that you scan only one pro-
gramming bar code label. DO NOT scan an ENTER/EXIT
bar code prior to scanning an interface selection bar
code.
Some interfaces require the scanner to start in the dis-
abled state when powered up. If additional scanner
configuration is desired while in this state, pull the
trigger and hold for 5 seconds. The scanner will change
to a state that allows programming with bar codes.