background image

Introduction

2

Rhino™  II

Product Presentation

The Rhino II vehicle mount computers, available in both 10" and 12"
display sizes, set the standard for ruggedness in the warehouse. A
sealed design tested to IP65/IP67 ensures operation in the toughest
environments. The capacitive touch models feature 3 mm anti-glare
armored glass, while still allowing use of gloves.

Tailored for warehouse management, the Rhino vehicle computer
increases productivity through reduced errors during receiving,
putaway, picking and shipping activities. Adding a handheld bar code
scanner such as Datalogic’s PowerScan™ allows for quick data entry
and location confirmations.

The Rhino vehicle computer is equipped with an internal isolated
power supply 12-48VDC, ignition sense to automatically control the
power, and an optional battery backup for the ultimate protection
against data loss. The Rhino vehicle computer fits different mounting
and space constraints. Mounting options include various brackets
and RAM mounts for the vehicle computer along with ABCD or
QWERTY external keyboards.

Содержание Rhino II A6















































































Отзывы: