Datalogic Rhino II A6, Руководство пользователя

Страница: 28 / 78

Rhino II Configuration
22 Rhino™ II
Front Panel Keys
The keys FN , 1/3 , 2/4 and KEY , on the right side of the
device, are programmable. The programming is set by
command lines in the "\Utilities\UtilConfig.cfg" file.
1/3 and 2/4 are programmable as two keys each, giving a
total of four available keys. When directly pressed, 1/3 and
2/4 keys enable respectively functions 1 and 2 .
After a FN key press, the device is set into function mode,
the blue function LED lights up and 1/3 and 2/4 keys
enable respectively functions 3 and 4 .
To turn off function mode, press 1 , 2 or FN .
By default, the keys have the following functions:
• Power – Starts and shutdowns the terminal according to the
current Startup/Shutdown mode.
• 1 – Up arrow
• 2 – Down arrow
• 3 – Back
• 4 – Return
• KEY – Home
Configuration
In [Keyboard] section, for each button there is a a keyword called
Frontkey_
XX , where XX is the name of the button.
Each button can be configured to send one ore more keycodes or to
launch an application.
Use the following syntax:
Frontkey_XX=#EXT=<virtual keycode>[..<virtual keycode>]
to assign
keycodes.