background image

 

 

Datalogic Mobile S.r.l. 
Via S. Vitalino 13 
40012 - Lippo di Calderara di Reno 
Bologna - Italy 
Rhino™10 User's Manual 
Software Version: 1.0.x 
Part Number: 822001150 
Ed.: 12/2011 

Datalogic Mobile, Inc. 
Eugene, OR 97405 
U.S.A. 

http://www.mobile.datalogic.com

 

© 2011  Datalogic Mobile, Inc. • All rights reserved. • Protected to the fullest extent under U.S. and international laws. • 
Copying or altering of this document is prohibited without express written consent from Datalogic Mobile, Inc. 

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries including the U.S.A. 
and the E.U. • Rhino is a trademark of Datalogic Mobile S.r.l.  

Other brands and product names may be trademarks of their respective owners.  • Reasonable measures were taken 
to ensure that the information provided is complete and accurate at the time of publication. • Datalogic Mobile, Inc. is 
not responsible for errors of omission or inaccuracies, as material becomes dated shortly following publication. How-
ever, Datalogic reserves the right to change any product specification at any time without prior notice.  The information 
contained herein is provided solely for the purpose of allowing customers to install, operate, configure, and develop ap-
plications for Datalogic manufactured equipment and is not to be released, reproduced, or used for any other purpose 
without written permission of Datalogic Mobile, Inc. 

The Bluetooth

®

 word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Datalogic Mobile, 

Inc. is under license. 

Wi-Fi is a registered certification mark of the Wi-Fi Alliance.   

Microsoft, WindowsCE, and the WindowsCE logo are registered trademarks of Microsoft Corporation in the United 
States and/or other countries. 

 

 

Содержание Rhino 10





















Отзывы: