DATALOGIC
22
WEDGE DEFAULT SETTINGS
(only for Quickscan M2 Type:130)
USA keyboard, caps lock off, caps lock auto-recognition enabled; num lock
unchanged, inter-character and inter-code delay disabled.
DATA FORMAT: code identifier disabled, code length not transmitted, no
header, terminator = ENTER, character replacement disabled, address
stamping disabled, address delimiter disabled.
IBM DEFAULT SETTINGS
(only for Quickscan M2 Type:110)
DATA FORMAT: IBM Standard, code identifier disabled, no header, no
terminator
PEN DEFAULT SETTINGS
Interpret operating mode, minimum output pulse 600
µ
s, conversion to Code 39,
overflow medium, output level normal, idle level normal, inter-block delay
disabled.
TECHNICAL FEATURES
QuickScan
®
Mobile Reader and Cradle
Electrical Features - READER
Battery Type
1 Lithium battery 700 mAh
Time of recharge Lithium
max 6 hours with USB cable
Operating autonomy
typical 20000 reads
Indicators
LED, Beeper
Max scan rate
235 scans/sec
Electrical Features - CRADLE
Supply voltage
5 VDC
±
5%
Power consumption
max. 4 W (charging)
LED Indicators
Battery charging
red
Charge completed
green
Power / Data
yellow
Optical Features
Sensor
CCD solid state (2088 pixels)
Illuminator
LED array
Wavelength
630 ~ 670 nm
Max. LED Output Power
0.33 mW
LED safety class
Class 1 EN 60825-1
Reading field
see reading diagram
Max. resolution
0.10 mm, 4 mils
PCS minimum
20% (Datalogic Test Chart)
