Datalogic PowerScan Series, Руководство по продукции

Страница: 374 / 411

358
POWERSCAN™ PD/PM/PBT9600
APPENDIX B
MAINTENANCE
CLEANING PROCEDURE
Proper cleaning is needed on the external plastic surfaces and output window to guar -
antee reliable scanning and charging of the battery.
A regular cleaning routine will remove the dust and dirt that may accumulate on the
product over time. The maintenance activity may be repeated more frequently depend -
ing on the severity of the environment in which the scanner is used.
A periodic deeper cleaning is suggested once per month.
Cleaning Plastic Surfaces
Exterior surfaces and scan windows exposed to spills, smudges or debris accumulation
require periodic cleaning to ensure best performance during scanning operations. Fol -
low the procedures described in this instruction sheet to keep your PowerScan™ device
in good operating condition.
Common Cleaning Solutions
The cleaners and disinfectants (or their equivalent) listed below have been tested for
use on the PowerScan™ 9600:
WARNING: Be sure to turn off power and unplug the device from electrical
outlet before cleaning.
CAUTION: DO NOT use abrasive pads or cleaning agents.