LED and Beeper Indications
28
PowerScan™ PD9530
Programming Mode
-
The following indications ONLY occur
when the reader is in Programming Mode
.
Green Spot
a
flashes momen-
tarily
Upon successful
read of a label, the
software shall turn
the green spot on
for the time speci-
fied by the config-
ured value.
N/A
N/A
Image Capture
When ready to cap-
ture image
Blue light flashes 2
times when
updating
N/A
a
Except when in sleep mode or when a Good Read LED Duration other than 00 is selected
INDICATION
DESCRIPTION
LED
BEEPER
Label Program-
ming Mode Entry
A valid programming
label has been scanned.
LED blinks con-
tinuously
Reader sounds
four low fre-
quency beeps.
Label Program-
ming Mode Rejec-
tion of Label
A label has been
rejected.
N/A
Reader sounds
three times at
lowest fre-
quency and cur-
rent volume.
Label Program-
ming Mode
Acceptance of
Partial Label
In cases where multi-
ple labels must be
scanned to program
one feature, this indica-
tion acknowledges
each portion as it is suc-
cessfully scanned.
N/A
Reader sounds
one short beep at
highest fre-
quency and cur-
rent volume.
Label Program-
ming Mode
Acceptance of
Programming
Configuration option(s)
have been successfully
programmed via labels
and the reader has
exited Programming
Mode.
N/A
Reader sounds
one high fre-
quency beep and
4 low frequency
beeps followed
by reset beeps.
Indicator
Description
LED
Beeper