Datalogic MX-U100, Руководство по оборудованию

Страница: 54 / 64

Processor Inputs MX-U Series Hardware Guide
Datalogic Automation, Inc. 4-2
NOTES:
1. Common Minus for output ports (External 12 to 24VDC Minus)
2. Common Plus for input ports (External 12 to 24VDC Plus)
3. Common Plus for output ports (Not an output voltage source. External 12 to 24VDC Plus is required)
Processor Inputs
The MX-U Series Processors contain sixteen general-purpose input connections.
Two inputs serve as both event and polled inputs (Inputs 1 and 2). The remaining inputs are polled. The event inputs are
interrupt-driven which means that a change of state on the input will immediately cause an action and any inspection task
that uses that input will run. Polled input means that the input’s status is checked based on conditions defined in the
inspection task.
Interrupt-driven inputs are edge-triggered and the duration of the input pulse must be longer than the debounce time. The
active trigger edge (rising, falling, or both), input pulse duration, and debounce, are all configured in the Vision Program
Manager Settings tab.
20
21 Red/Green
Orange/Green
Output Minus (Note 1)
Output 1
22
23 Black/White/Red
White/Black/Red Output 2
Output 3
24
25 Red/Black/White
Green/Black/White
Output 4
Output 5
26
27 Orange/Black/White
Blue/Black/White
Output 6
Output 7
28
29 Black/Red/Green
White/Red/Green
Output 8
Output 9
30
31 Red/Black/Green
Green/Black/Orange
Output 10
Output 11
32
33 Orange/Black/Green
Blue/White/Orange
Output 12
Output 13
34
35 Black/White/Orange
White/Red/Orange
Output 14
Output 15
36
37 Orange/White/Blue
White/Red/Blue
Output 16
Output Plus (Note 3)
J1 (37 Pin "D" Sub Male)
AMP Part 747916-4
Part 244-0287
(Solder Side)
Connector or terminal
number
Color Code Signal Name
Pin 1
Pin 37