Datalogic MX-U Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 56

background image

MX-U Series Processor and Camera Guide

Setting Up the System

1-5

Datalogic Automation, Inc..

9. Wire the MX-U Series Processor power connector to the optional power supply. Wire AC power to the power sup-

ply. Connect the power supply plug to the processor connector. See “Power Supply Connection” on page 2-5.

10.Connect the cables from the MX-U Series terminal blocks to their cameras.

11.A USB HASP (Hardware Against Software Piracy) key is provided with the processor. Be sure the key is inserted

into the USB port labeled USB5 on the processor front. (See “Front Panel Connections” on page 1-7 and “HASP
Key” on page 2-7.)

12.Plug the power supplies into an appropriate

grounded

power source. To protect your system, we recommend using

a surge protector.

13.Turn on the MX-U Series Processor power switch. Turn on the camera power supply.

NOTE

: Default network IP addresses were assigned to the MX-U Series Processor and Cameras at the factory. You will

probably not need to change them unless there is a conflict with other devices on your network.

14.Start the Impact Software program Vision Program Manager and click on the Settings tab. Check your camera and

lighting setup, calibrate the camera, configure your inspection parameters, then put the camera online. For more
information about using Impact software, refer to the Impact Reference Guide.

If your system does not work when you are finished with the setup, review the instructions and diagrams to make sure you
made all connections properly.

Please note that Datalogic cannot guarantee the performance of MX-U Series systems which have additional software
installed on them, including, but not limited to, anti-virus and firewall software. Datalogic recommends that MX-U Series
systems remain disconnected from networks that access the Internet in order to minimize security risks. Datalogic will
attempt to support systems with antivirus software installed, but we cannot guarantee system performance.

«
...
9
10
11
12
13
...
»

Содержание MX-U Series

























































Отзывы:

Нет отзывов

Похожие инструкции для MX-U Series

Бренд: B&G Страницы: 198

GPS 152 - Marine Receiver

Бренд: Garmin Страницы: 1

Бренд: Riccar Страницы: 22

Бренд: Singer Страницы: 78

GPSMAP 8400 series

Бренд: Garmin Страницы: 82

Бренд: Necci Страницы: 39

Бренд: JUKI Страницы: 32

Embroidery Machine

Бренд: eMotions Страницы: 42

Progressive Series

Бренд: Graco Страницы: 14

Бренд: Graco Страницы: 26

Express Kingsize

Бренд: addi Страницы: 20

LZ-2290A/IP-110A/SC-915

Бренд: JUKI Страницы: 119

LZ-2290A-SR/IP-110D/SC-916

Бренд: JUKI Страницы: 151

Бренд: Sunstar Precision Страницы: 84

Бренд: Pfaff Страницы: 44

Бренд: Spokey Страницы: 28

Бренд: Spokey Страницы: 28

Бренд: handi quilter Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды