MATRIX 210™ QUICK GUIDE
12
STEP 3 – AIM THE READER
Matrix 210™ provides a built-in aiming system to aid reader positioning. The aiming system is accessed through the X-PRESS™
Interface.
1.
Power the reader on. During the reader startup (reset or restart phase), all the LEDs blink for one second. On the connector
side of the reader near the cable, the “POWER ON” LED (blue) indicates the reader is correctly powered.
2.
Enter the Aim/Locate function by pressing and holding the X-PRESS™ push button until the Aim LED is on.
3.
Release the button to enter the Aim function. The aiming system turns on see Figure 7.
4.
Place the application specific code in front of the reader at the reading distance indicated for your model in the Reading
Features table, centering it in the aiming system indicator.
FOV
default value for:
UHD models
default value for:
NEAR, MEDIUM,
FAR models
FOV
Figure 7 – Aiming Function Using The Blue Ring or Internal Lighting System *
green
green
yellow
yellow
red
Figure 8 – X-PRESS™ Interface:
Aim Function
* the default value of the Aiming System Status parameter can be changed in VisiSet™.
5.
Exit the Aim function by pressing the X-PRESS™ push button once. The aiming system turns off.
