Datalogic MAGELLAN 3200VSI, Справочное руководство

Страница: 14 / 206

6 Magellan™ 3200VSI
Figure 4. Using the Risers
One Riser
Two Risers stacked. Scan-
ner and L-Bracket have
been tilted on the top Riser.
a b
Wall Mount
Attach the L-Bracket to the wall, securing it in the desired position with two
screws through the two holes in the back face of the L-Bracket as shown in Fig-
ure 3 . Recommendation: Use two Pan Head (8.2mm or 5/16” maximum head
diameter) #8 screw with a thread profile that suits the mounting surface mate-
rial in the wall.
Countertop Mount
If using the L-Bracket alone for countertop installation, secure the bracket in
place using two screws through the bottom face of the bracket (see Figure 3 ). If
risers are used, secure a riser to the countertop by attaching two screws
through its screw holes. Recommendation: Use two Pan Head (8.2mm or 5/16”
maximum head diameter) #8 screw with a thread profile that suits the mount-
ing surface material in the countertop.
CAUTION
Do not use a countersink type of screw head. Damage
will occur from use of a countersunk screw head in the
plastic screw bosses
Risers may be stacked as shown in Figure 4 b. Each riser increments the height
of the mounted scanner by 1.5” (38.1mm). Riser pieces readily snap together or
apart and allow for adjustable tilt of the scanner/L-Bracket of up to 20 degrees
in 5° increments. Figure 4 b provides an example of a tilted scanner.