Datalogic Magellan 1500i, Краткое руководство пользователя

Страница: 14 / 28

10
MAGELLAN™ 1500I
PROGRAMMING
On leaving the factory, units are generally programmed with the most
common terminal and communications settings. If you need to change
these settings, custom programming can be accomplished using one of
several methods.
This manual offers programming barcodes for common functions.
Additional programming barcodes are available in the PRG, or use
software utilities such as Datalogic Scanalyzer or Datalogic Aladdin, all
available on the Datalogic website.
Service Port Mode
To program the Magellan 1500i using Scanalyzer or Aladdin, the unit
must first be placed into Service Port mode, as follows:
1. Unplug the unit if needed.
2. While Holding down the Scan Button on the top of the unit, plug
the scanner in.
3. The scanner will enter Service Port Mode, enabling it to be
programmed via software utilities.
Using Barcodes
After completing the physical connection between the scanner and its
host, go to the Programming Bar Codes table on the following pages to
locate the interface type for your scanner (such as RS-232, USB, etc.).
Scan a START/END bar code once to enter Programming Mode. After
scanning the programming label for the desired interface, scan the
START/END barcode a second time to accept your changes, exit
Programming Mode and return the scanner to normal operation.
NOTE
It is not necessary to place the scanner into Service
Port Mode to program with barcode labels.