Datalogic Magellan 1500i, Краткое руководство пользователя

Страница: 7 / 28

QUICK REFERENCE GUIDE
3
German GS Safety Certification
The following statement is required for the German GS safety
certification
:
INSTALLATION
Route the interface cable from the terminal or host. Plug the AC adapter
(if one is used) into a wall outlet and the interface (I/F) cable, then route
and attach the I/F cable to the scanner. Verify operation by presenting
known-good bar codes to the scanner. The unit should beep
1
and/or
flash its good read LED and send the bar code data to the host or
terminal. If not, refer to the Troubleshooting section of this guide.
The Magellan 1500i uses intelligent illumination technology to optimize
light levels for a variety of bar code scanner functions including
automatic reading of bar codes from printed surfaces, mobile devices
and image capture in variable contrast nments.
This product is not intended for use in the immediate or direct visual
field of the display work place. To avoid disturbing reflections on
the display work place, this product shall not be placed in the
immediate or direct field of vision.
1. Beeper and LED behavior is selectable and may have been disabled by a pre-
vious user.
Connect
Here
I/F Cable
To Host/Terminal
A/C Adapter
(if needed)