Datalogic E1 Series, Руководство по оборудованию

Страница: 61 / 120

MX-E Series Hardware Guide Basler Cameras
55 Datalogic S.r.l.
Basler Cameras
The MX-E Series Processor and Impact Software can support a wide variety of Basler GigE cameras, in addition to the
models listed below, including all Ace and Scout models. Ace model numbers begin with “acA” and Scout model num-
bers begin with “scA.” For complete details and the most accurate specifications for these cameras, consult the manufac-
turer’s documentation.
Datalogic assumes no responsibility for the accuracy or timeliness of this third-party camera informa-
tion.
You must purchase a license from Datalogic to connect a third-party camera to the MX-E Series pro-
cessor.
B a s l e r Av i a t o r C a m e r a s
C a m e r a C o n n e c t i o n
WARNING: THIRD-PARTY CAMERA REQUIREMENTS ARE DIFFERENT. THESE
CAMERAS R12 VDC POWER. USE CAUTION WHEN CONNECTING
POWER TO THESE CAMERAS.
To connect power, trigger signals, and strobe outputs for these Basler camera models, use
cable 606-0673-xx (12-pin Hirose Male to HD-15) with terminal block 661-0400.
Model
(GigE)
Resolution
(Megapixels)
Color Image
Horizontal
Image Vertical FPS
(approx)
Minimum Software
Version Required
avA1000-100gm
avA1000-100gc
1 No
Yes
1024 1024 101 10.3.0
avA1600-50gm
avA1600-50gc
1 No
Yes
1600 1200 55 10.3.0
avA1900-50gm
avA1900-50gc
2 No
Yes
1920 1080 51 10.3.0
avA2300-25gm
avA2300-25gc
3 No
Yes
2239 1750 26 10.3.0
Terminal Signal Name Notes
Camera Power Ground Camera Ground
I/O Ground I/O Ground
Camera Power +VDC Camera Power +12 VDC recommended @ 500 mA Max
Maximum: +13.2 VDC
VCC Power for Strobe Trigger Out +3.3 to +24 VDC; 50 mA Max
Maximum: +30 VDC
Input 2 VCC DO NOT USE Not Currently Supported
Trigger VCC Trigger In Pullup - use if
Trigger In needs sourcing
input Recommended: +24 VDC