Datalogic DS8100, Руководство по установке

Страница: 17 / 65

GENERAL FEATURES
3
1
1.2.1 Indicators - DS8100 Serial Interface
The DS8100 Serial Interface has six LEDs and an LCD display on the front panel.
The indicators have the following functions:
Power ON: LED (green). Indicates the scanner is ON. (Figure A, 3).
Ext Trig: LED (yellow). Indicates the external presence sensor is active. (Figure
A, 4).
Encoder: LED (yellow). Indicates the external encoder signal is active (when
provided). (Figure A, 9).
Good Read: LED (red). Indicates a code is present in the reading zone. (Figure
A, 6).
TX Data: LED (green). Indicates data transmission both on the main and on
the auxiliary interface. (Figure A, 7).
User Defined: LED (red). The use of this indicator depends on the application.
(Figure A, 8).
LCD display: The LCD displays messages relative to the DS8100 configuration
and to the code read after decoding. It is a 2 x 20 character
display. (Figure A, 5).
1.2.2 Indicators - DS8100 Bus Interface
The DS8100 Bus Interface has six LEDs on the rear panel.
The indicators have the following functions:
Power ON: LED (green). Indicates the scanner is ON. (Figure B, 10).
Ext Trig: LED (yellow). Indicates the external presence sensor is active. (Figure
B, 9).
Encoder: LED (yellow). Indicates the external encoder signal is active (when
provided). (Figure B, 8).
Good Read:
LED (red). Indicates a probable code is present in the reading zone.
(Figure B, 7).
TX Data: LED (green). Indicates data transmission both on the main and on the
auxiliary interface. (Figure B, 6).
Network:
LED (red). In a normal situation, this LED is OFF. If the LED blinks, check
the connections between the DS8100 and the SC8000. When this LED is
ON, the network card needs to be reprogrammed. Contact your Datalogic
distributor. (Figure B, 5).