Datalogic Dragon D151, Справочное руководство

Страница: 47 / 107

CODE SELECTION
41
Set Lengths for Discrete 2 of 5
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Lengths for D 2 of 5 can be
set for any length, one or two discrete lengths, or lengths within a specific range. To
set lengths via serial commands; see
Setting Code Lengths Via Serial Commands in
Appendix B.
One Discrete Length - Select this option to decode only those codes containing a
selected length. For example, select D 2 of 5 One Discrete Length , then scan 1 , 4
Numeric Barcodes in Appendix C to decode only D 2 of 5 symbols containing 14
characters. To change the selection or cancel an incorrect entry, scan the
CANCEL
barcode in Appendix C.
ia'd=GGk
ia'd=GGk
ia'd=GGk
D 2 of 5 - ONE DISCRETE LENGTH
Two Discrete Lengths - Select this option to decode only those codes containing
two selected lengths. For example, select D 2 of 5 Two Discrete Lengths , then
scan 0 , 2 , 1 , 4 Numeric Barcodes in Appendix C to decode only D 2 of 5 symbols
containing 2 or 14 characters. To change the selection or cancel an incorrect entry,
scan the
CANCEL
barcode in Appendix C.
ia'd=GGdk
ia'd=GGdk
ia'd=GGdk
D 2 of 5 - TWO DISCRETE LENGTHS
Length Within Range - Select this option to decode codes within a specified range.
For example, to decode D 2 of 5 symbols containing between 4 and 12 characters,
first scan
D 2 of 5 Length Within Range , then scan 0 , 4 , 1 and 2 (single digit
numbers must be preceded by a leading zero) Numeric Barcodes in Appendix C. To
change the selection or cancel an incorrect entry, scan the CANCEL barcode in
Appendix C.
ia'd=GG^k
ia'd=GG^k
ia'd=GG^k
D 2 of 5 - LENGTH WITHIN RANGE
Any Length - Scan this option to decode D 2 of 5 symbols containing any number of
characters.