The following Keyboard Nationality selections are only valid
for IBM AT compatible PCs:
Japanese
i'+k
i'+k
i'+k
Russian
(Latin)
i'+#k
i'+#k
i'+#k
Russian
(Cyrillic)
i'+"Kk
i'+"Kk
i'+"Kk
Hungarian
i'+#Pk
i'+#Pk
i'+#Pk
Yugoslavian
i'+$Uk
i'+$Uk
i'+$Uk
Romanian
i'+%Zk
i'+%Zk
i'+%Zk
Czechoslovakian
i'+&_k
i'+&_k
i'+&_k
1 DEFAULT
UK
Read the RESTORE DEFAULT.
I
Leggere il codice che ripristina i default.
F
Lecture du code de configuration par défaut.
D
Lesen Sie den Restore Default Code, um die
Werkseinstellung wieder herzustellen.
RESTORE DEFAULT
iPk
iPk
iPk
RS232 DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no
handshaking, delay disabled, rx timeout 5 sec., ack/nack
protocol disabled, FIFO enabled, serial trigger lock
disabled;
DATA FORMAT
: code identifier disabled, no field adjustment,
code length not transmitted,
no header
,
terminator =
CR-LF
, character replacement disabled
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, num lock unchanged, inter-
character and inter-code delays disabled, control character
emulation = ctrl+shift+key;
DATA FORMAT
: code identifier disabled, no field adjustment,
code length not transmitted,
no header
,
terminator =
ENTER
, character replacement disabled
PEN EMULATION DEFAULT SETTINGS
interpret operating mode, conversion to code 39 disabled,
output level normal, idle level normal, minimum output
pulse 600
µ
s, overflow medium, inter-block delay disabled
POWER SAVE
sleep state disabled
READING PARAMETERS
trigger type = hardware, trigger signal = level, no trigger
timeout, Flash On = 1 sec, Flash Off = 0.6 sec, one read
per cycle, safety time 0.5 sec, beeper intensity high, tone 2,
aiming spot disabled
