manualshive.com logo in svg

Datalogic DLR-TL001, Руководство по продукции, Страница: 31 / 36

Поделиться
Скачать
Datalogic DLR-TL001 Скачать руководство пользователя страница 31

Product Reference Guide

                           27

Appendix 3

DLR-TL001 Regulatory Compliance

Please see the Regulatory Addendum included with your product for 

additional regulatory, safety and legal information.
The Regulatory Addendum and the Declaration of Conformity is also 

available on www.datalogic.com at the product page.

Regulatory Information 

All models are designed to be compliant with rules and regulations in 
locations they are sold and will be labeled as required. Any changes or 

modifications to equipment, not expressly approved by Datalogic could 

void the user's authority to operate the equipment. 
For installation, use and maintenance, do not open the Logger Tag DLR-

TL001. 
The DLR-TL001 is not user-serviceable. Opening the case of the unit can 

cause internal damage and will void the warranty. 

WEEE Statement 

For information about the disposal of Waste Electrical and Electronic 

Equipment (WEEE), please refer to the website at www.datalogic.com.

Datalogic Limited Factory Warranty 

Warranty Coverage 

Datalogic warrants to Customer that Datalogic's products will be free 

from defects in materials and workmanship for a period of 3 months 

from product shipment. This warranty does not extend to batteries and 

cables. As consumable items batteries and cables carry a 90 day warranty 

from time of purchase for DOA (dead on arrival) defects. In order to 

obtain service under this Warranty, Customer must notify Datalogic of 

the claimed defect before the expiration of the Warranty period and 

obtain from Datalogic a return authorization number for return of the 

product to designated Datalogic service center. If Datalogic determines 

Customer's claim is valid, Datalogic will repair or replace product without 

additional charge for parts and labor. Customer shall be responsible for 

packaging and shipping the product to the designated Datalogic service 

center, with shipping charges prepaid. Datalogic shall pay for the return 

of the product to Customer if the shipment is to a location within the 

country in which the Datalogic service center is located. Customer shall 

Содержание DLR-TL001





































Отзывы:

Нет отзывов