manualshive.com logo in svg

Datalogic DL-Axist, Руководство пользователя, Страница: 24 / 265

Поделиться
Скачать
Datalogic DL-Axist Скачать руководство пользователя страница 24

Battery

16

DL-Axist™

WARNING

Installing, charging and/or any other action should be
done by authorized personnel and following this
manual.

The battery pack may get hot, explode, ignite, and/or
cause serious injury if exposed to abusive conditions.

If the battery pack is replaced with an improper type,
there is risk of explosion and/or fire.

Use the battery box to carry the battery pack, do not put
the battery pack in your pocket.

Do not place the battery pack in or near a fire or other
heat source; do not place the battery pack in direct
sunlight, or use or store the battery pack inside
unventilated areas in hot weather; do not place the
battery pack in microwave ovens, in clothes dryers, in
high pressure containers, on induction cook surfaces or
similar devices. Doing so may cause the battery pack to
generate heat, explode or ignite. Using the battery pack
in this manner may also result in a loss of performance
and a shortened life expectancy.

Use only a Datalogic approved power supply. The use of
an alternative power supply will void the product
warranty, may cause product damage and may cause
heat, an explosion, or fire.

Содержание DL-Axist










































































































































































































































































Отзывы:

Нет отзывов