Datalogic DataVS1, Инструкция по эксплуатации

Страница: 35 / 88

Instruction Manual DataVS1 Series
31
To select the memory bank you wish to use, move the cursor using the
ARROW
buttons and press
the
SET
button to confirm.
When you are on the selected memory bank, you can perform three different operations which can be
recalled using the icons at the bottom of the screen:

Load: This loads the inspection memorised on the selected bank.
Press the
SET
button to load the selected inspection onto the device. After a few seconds,
a confirmation message is displayed on the device. After pressing
SET
again you will be
asked if you wish to use the loaded inspection as the default inspection the next time the
device is rebooted. It is possible to select the option using the
ARROW
buttons and then
press
SET
to confirm.

Save: this saves the current inspection to the selected bank.
Press the
SET
button to save the current inspection onto the device. If the selected slot is
not free, a message will appear on the screen asking if you wish to overwrite the inspection
currently saved in this databank. Use the
ARROW
and
SET
buttons to scroll and select the
option. After a few seconds, you will be asked if you wish to use the loaded inspection as
the default inspection the next time the device is rebooted. It is possible to select the option
using the
ARROW
buttons and then press
SET
to confirm.

Clear: This deletes the inspection memorised on the selected bank.
Once the
SET
button has been pressed, the device requests delete confirmation. The user
can select the option using the
ARROW
buttons and then press
SET
to confirm.