SC6000
52
4
In case of SC6000 failure proceed as follows:
Figure 40 - Removing the Compact Flash
1. Disconnect the device
2. Remove the rubber cover of the Compact Flash slot using a screwdriver
3. Remove the Compact Flash
4. Connect a new SC6000 to the system
5. Insert the Compact Flash card
CAUTION
Make sure not to insert the Compact Flash card upside down. Carefully
insert it in the guides, so that it will not fall inside the device. Gently push it
into the slot.
6. Start up the system
The system configuration is automatically restored and the reading station is ready to start
working again.
4.2 AUTOMATIC SCANNER REPLACEMENT (ASR)
When SC6000 is used in a network of DS8100 or DX8200 scanners, (Topology Role
parameter = Other; Device Assignment parameter = Controller Lon Old8K), an ASR backup
procedure must be performed to automatically manage scanners and SC6000 replacement
in case of failure (ASR Restore).
NOTE
In order for the ASR procedure to work on DS8100 or DX8200 slave
scanners, they must have been installed according to the procedure in par.
3.3
.
Once the system configuration has been completed, launch the ASR backup by one of the
following methods:
Using Genius:
Click on the ASR backup item in the Device Menu. You will be prompted to select the desired
backup option (complete, all slaves, controller).
