INSTALLATION
17
2
2.5 TYPICAL LAYOUTS
The following typical layouts refer to system hardware configurations, but also require the
correct setup of the software configuration parameters (see par. 3.2 for details).
Other layouts require the use of a specific SC6000 Controller model.
The accessories and cables indicated in the following figures are Datalogic products. We
suggest their use to guarantee the correct system functioning.
2.5.1 Large Synchronized Network Layout
When building a large local Lonworks network (more than 10 scanners), an SC6000
Controller must be used together with a PWO power supply/junction box unit. In this case the
SC6000 unit acts as the system master and is connected to the host through one of its
interfaces.
All scanners act as slaves and are connected to the SC6000 through the PWO power
supply/junction box. For DS8100A/DX8200A scanners, 4 branch connectors provide
Lonworks communications between the scanners and the SC6000 unit. The last scanner on
the line requires a Termination connector as well as any unused branches in the PWO unit.
The allowed maximum bus length is 65 m.
External devices such as a presence sensor and an encoder are all connected to the PWO.
Figure 22
– Large Synchronized Network with DX8200A and DS8100A Scanners
Extended I/O
Host
HUB
ETHERNET
SC6000
AUX
CAB-SC6003
CAB-SC6013
Power/Net
VAC INPUT
CAB-SC6103
Cable
PWO
LONWORKS
ENCODER
PS
PS Aux
CAB-81xx
CAB-81xx
CAB-81xx
CAB-81xx
CAB-81xx
BTK-8100
Bus Return
DX8200A
DS8100A
DX8200A
DX8200A
DS8100A
DX8200A
DS8100A
CAB-81xx
CAB-81xx
BTK-8100
Bus Return
CAB-81xx
DS8100A
B
A
C
E
G
H
F
D
