Datalogic C-BOX 300, Руководство по установке

Страница: 15 / 38

GENERAL FEATURES
1
1
1 GENERAL FEATURES
1.1 DESCRIPTION
The C-BOX 3X0 is a connection box available in two models: C-BOX 300, without
display, and C-BOX 310, with a LCD display.
It can be used as an accessory of the Datalogic scanners to perform the following
functions:
•
Facilitate the connection of the scanner signals using a spring clamp connector.
•
Perform a conversion from RS232 to Profibus to connect a RS232 scanner to a
Profibus network.
•
Get the scanner configuration and store it in memory.
•
Force the scanner to the Test operating mode.
•
Send the configuration stored in memory to the scanner.
•
In the C-BOX 310, visualize the data packet sent by the scanner on the LCD.
The C-BOX 300 / C-BOX 310 mechanical dimensions are 167 x 115 x 61 mm (6.57 x
4.53 x 2.40 in.). The C-BOX 300 weighs about 440 g (15.50 oz); the C-BOX 310
weighs about 500 g (17.60 oz).
Electrical connection is provided through spring clamp terminal blocks inside the C-
BOX 3X0.
The scanner is connected to the C-BOX 3X0 through a 25-pin connector placed on
the left side of the housing.
A 9-pin connector placed inside the C-BOX 3X0 facilitates connection between an
external PC and the auxiliary serial interface of the scanner.
The external 9-pin female connector is used to connect the C-BOX 3X0 to a Profibus
network.