Datalogic AI7000, Руководство по продукции

Страница: 320 / 352

MAINTENANCE
306
AV7000 LINEAR CAMERA
3. Review the exterior cleaning procedure before cleaning the deflection mirror.
4. Check the deflection mirror for any dust, dirt, or smudges. If the deflection mirror
needs to be cleaned, proceed to Step 5 .
5. Use a dry, soft, lint-free cloth to remove accumulated dust.
6. If the deflection mirror is particularly dirty or smudged, make a solution of seven
parts denatured alcohol and three parts water. (Many over-the-counter solutions
will leave deposits/smudges that can affect performance.)
7. Apply the cleaning solution to a lint-free cloth.
8. Apply the cloth with the cleaning solution to the mirror.
9. Remove any streaks or remaining moisture from the mirror with a dry, soft, lint-
free cloth or lens paper.
10. Verify camera operation.
Cleaning the RangeFinder Windows
This procedure is recommended only if it is noticed that the environment is dirty
enough that deposits are appearing on the RangeFinder windows. The cleaning proce-
dure should be performed without removing the RangeFinder from the mounting struc-
ture.
1. Switch off the conveyor.
2. Switch off the camera system.
3. Review the exterior cleaning procedure before cleaning the three windows.
4. Check the windows for any dust, dirt, or smudges. If the window needs to be
cleaned.
5. Use a dry, soft, lint-free cloth to remove accumulated dust.
Shut down the camera system before performing this maintenance task. Do not stare
into the camera’s window at the LED light. Avoid direct eye exposure. The LED light
level does not constitute a health hazard, however staring at the LED light for prolonged
periods could result in eye damage.
Use care when cleaning the RangeFinder to assure the windows are not scratched or
damaged in any way. Never apply cleaning solution directly to the windows. Always
apply the solution to a cloth, and then the cloth to the windows.