Datalogic AI7000, Руководство по продукции

Страница: 164 / 352

E-GENIUS
150
AV7000 LINEAR CAMERA
Select Upstream or Downstream. This parameter specifies if the distance from the physical
Trigger Line is required Upstream or Downstream (i.e. Trigger Source) To the expect receiving
point of the Protocol Index, measured in mm. It is used together with the Minimum Distance
Between Two Consecutive Objects (below) parameter to assign the Protocol Index information
to the correct package.
Crisplant Settings
Crisplant Protocol Type
Select P10, CSC, or CMC from the drop-down list.
•SORTERCMC P10
•The Protocol Index message syntax is fixed according to the Crisplant P10 message
specifications.
•S2000-CSC
• The Protocol Index message syntax is fixed according to the Crisplant CSC message
specifications.
•S2000-CMC
•The Protocol Index message syntax is fixed according to the Crisplant CMC message
specifications.
Scanner ID
Select Datalogic NVS9000/AV7000, Accu-Sort 4800, Accu-Sort 55/70, Accu-Sort Quad-X.
Available if Crisplant has been selected.
Heartbeat Enable
Select the check box to enable heartbeat messages.
Heartbeat Timeout
Enter a time value in seconds to define the amount of time between two message
transmissions. If the input timeout expires and no transmission has occurred, the Heartbeat
message will be transmitted.
Include Code Type in message
Select the check box to include the Code Type in the message.
B
EUMER
Delay Request Message
When unchecked, the request message gets sent at start of trigger. Select this check box and
the request message will be delayed by the Reference Edge and Distance to Trigger Line
specified here.