Datalogic AI7000, Руководство по продукции

Страница: 145 / 352

MODIFY SETTINGS | GLOBAL SETTINGS | BARCODE SETTINGS | BARCODE SETTINGS CONFIGURATION
PRODUCT REFERENCE GUIDE
131
MODIFY SETTINGS | GLOBAL SETTINGS | BARCODE
SETTINGS | BARCODE SETTINGS CONFIGURATION
Barcode Configuration
is used to define the relationship of barcodes and how they are
grouped together for transmitting to the host. It also defines the formatting of no read,
multiple read, partial read and duplicate messages.
To edit the Barcode Configuration:
1. In the menu tree under
Modify Settings,
navigate to
Global Settings | Barcode Set-
tings | Barcode Configuration.
The
Barcode Configuration
window opens.
2. Enter the appropriate information in the form as described below:
Minimum 1D Code Height
Enter the minimum height of codes. This parameter defines the minimum height of the
barcode the AV7000 will read.
Code Combination
Select
Single Label, Standard Multi Label, Logical Combination
, or
Code Collection
from
the drop-down list. The Code Combination parameter selects the decoding mode for the
barcode reader.
•
Single Label
: In Single Label mode only one barcode can be read in each reading phase;
however it can be determined automatically from up to 50 enabled codes. The barcode
reader stops decoding as soon as a code is read. See
“Barcode Configuration |Single Label”
on page 133.
•
Standard Multi Label:
In Multi Label mode the barcodes selected (up to 10), will all be read
in the same reading phase. If the reading phase terminates before all the codes are read, a
Global No Read message will be produced, unless it is disabled, in which case a Local No Read
will be produced. See
“Barcode Configuration |Standard Multi-Label” on page 135
If there are multiple barcodes within the barcode readers read area during a trigger
cycle, the first barcode decoded will be the data transmitted to the host.