DKM-250 User Manual V-2.0
23
This parameter determines the Modbus node address of the unit.
Every unit in the same Modbus loop must have a different node
address.
Factory set value is 1.
Adjustment range is 0 to 245.
This parameter determines the data rate (baud rate) used in the
Modbus communication. Every unit in the same Modbus loop must
use the same data rate.
0:
Baud rate = 2400
1:
Baud rate = 4800
2:
Baud rate = 9600
3:
Baud rate = 19200
4:
Baud rate = 38400
Factory set value is 2.
Adjustment range is 0 to 4.
If this parameter is set to a value different from 0, then the unit will
require this parameter as a password prior to Modbus writes or
Modbus commands.
If the parameter is set to 0 then no password is required.
Factory set value is 0.
Adjustment range is 0 to 9999.
4.16 MODBUS PARAMETERS
