Datajack sierra 597, Руководство пользователя

Страница: 5 / 13

5
2. Remove the protective cap from the USB connector of the USB modem by placing your fingers on the
side grips of the cap and carefully pulling the cap off.
3. Gripping both sides of the USB modem, insert it into your computer’s USB slot.
Windows detects the USB Modem and installs the drivers for it. This may take a few minutes. Once
completed, the system tray may display “Your devices are ready to use” or “Your new hardware is installed
and ready to use.”
The LED indicator is lit (blue, or blinking amber)
4.
If the Software Installation Wizard has not started automatically, in Windows Explorer browse to the
TRU-Install entry (under My Computer) and run AppLaunch.exe or, if you’re running Windows Vista/7, in
the “AutoPlay” window click SmartView Installation to start the wizard.
5.
In the installation window, click Next .
6.
Read the License Agreement and select “ I accept the terms in the license agreement ” to agree to the
terms. Click Next . (A series of dialog boxes guides you through the installation.)
7.
Use the Next and Back buttons to navigate through the wizard.
8.
In the “Installation Wizard Completed” window, click Finish .
9.
Wait until the system tray displays “Your devices are ready to use” or “Your new hardware is installed
and ready to use.”
10.
If a message that you must restart your computer is displayed, click Yes to restart your computer. Wait
until your computer restarts.
11.
Proceed to “Starting the Windows Software” on page 7.