Setting Proper ADI Environment for AutoCAD Protected Mode
Display List Drivers
To allow successful installation, first you will need to setup your ADI
environment properly by using the following steps:
1
Insert the AIO-4045 Driver Disk 2 into your floppy drive A. At
the DOS prompt, simply type:
A:\INSTALL
[Enter]
2
Select the option for Driver Installation and select "PADI386".
3
Provide the correct drive path for the AutoCAD directory and press
[Enter]. The INSTALL program will automatically copy all
available driver files into the specified directory.
4
Use DOS editor or any other editor to place the following
commands to be the first two line commands of your
AUTOEXEC.BAT file:
SET DSPADI=drv:\path\filename
SET RDPADI=drv:\path\filename
NOTE
"DSPADI": The environment name recognized by AutoCAD.
"RDPADI": The environment name recognized by AutoShade.
"drv:\path" Enter the drive ID and path name where you have
stored your AVANCE LOGIC GRAPH ICS high
resolution protected mode ADI display List drivers.
"filename":
Select the following filenames:
36