DM4380 – Installation Guide
Logging in for First Time
204.4336.00 - October/2019
33
Step 1
Entering the configuration mode:
#
configure
Step 2
Entering the MGMT interface configuration:
(config)#
interface mgmt 1/1/1
Step 3
Configuring the IPv4 address on MGMT interface:
(config-mgmt-1/1/1)#
ipv4 address
172.2.22.1/24
Step 4
Removing the IPV4 default address:
(config-mgmt-1/1/1)#
no ipv4 address
192.168.0.25/24
(config-mgmt-1/1/1)#
top
Step 5
Configuring the equipment default gateway:
(config)#
router static address-family ipv4
0.0.0.0/0
next-hop
172.2.22.254
Step 6
Apply and save the configuration:
(config)#
commit
Table 17 – Configuring the MGMT Interface
Check the Quick configuration Guide for more information about
equipment management configurations.
6.3
C
ONFIGURING
U
SERS
Considering the equipment correctly installed as described previously, the user can
manage it through a Command Line Interface (CLI). The CLI is accessed by using a
direct or USB console connection or by using a SSH or Telnet connection from a remote
management terminal.
Only one account is pre-configured in default factory config in the DM4380 line:
admin
User
Password
Description
admin
admin
Admin is an account that has
admin
level
privileges. So, it can view and change all device
parameters. It is a complete read-and-write
access to the entire device.
Table 18 – Default account
Due the security reasons, it is strongly recommended to change
the
admin account password at the
first
time login.
